|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-12-2020, 12:23 AM | #1 |
Not Yet Wild
Join Date: Jul 2020
Posts: 1
|
2008 EZGO RXV Resistor Controller Module
The cart locked up on me last weekend with no solenoid or brake engagement in any mode. After following the diagnostic manual through (disconnected the black wire from the controller and it was driveable), I ordered a new replacement control module and installed it. Cart behaves exactly the same way. Is it possible the new unit is defective or is there another issue I should be investigating?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
What causes resistor control module to blow? | Electric EZGO | |||
EzGO RXV Resistor control module | Electric EZGO | |||
WTB Rzgo RXV Resistor Control Module for Danaher Controllers | Golf Carts and Parts | |||
2012 RXV resistor control module question | Electric EZGO | |||
Ezgo Marathon Resistor to Controller conversion kit | Design Center |