|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-26-2020, 09:17 AM | #1 |
Not Yet Wild
Join Date: Jul 2019
Posts: 48
|
Replaced cables to 2 gauge and cart doesn’t work.
I replaced all of the cables on my ezgo txt series cart and now the cart will not move in forward or reverse. I have power and solenoid click. My alltrax is not showing any error codes but I have no movement. Can anyone assist please?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2020, 09:30 AM | #2 |
Gone Wild
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
|
Re: Replaced cables to 2 gauge and cart doesn’t work.
Most likely an error in cable reattachment. Easy to do. Do you have your before and now an after picture of the F-R switch wiring for everyone to help you with diagnosis. That would help JohnnieB, an expert here, who will probably see this soon.
|
09-26-2020, 10:14 AM | #3 |
Not Yet Wild
Join Date: Jul 2019
Posts: 48
|
Re: Replaced cables to 2 gauge and cart doesn’t work.
I took cables off one at a time and replaced one by one. So not sure how any would be wrong.
|
09-26-2020, 10:17 AM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Replaced cables to 2 gauge and cart doesn’t work.
Connect your DVM between the controller's B- and M- terminals.
When pedal is pressed just far enough to make solenoid click, you should have FULL battery pack voltage between those two terminals. If you don't, go looking for the missing voltage with the test lead that was on the M- terminal. F/R switch is the most likely suspect. |
09-26-2020, 10:23 AM | #5 | |
Not Yet Wild
Join Date: Jul 2019
Posts: 48
|
Re: Replaced cables to 2 gauge and cart doesn’t work.
Quote:
|
|
09-26-2020, 10:53 AM | #6 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Replaced cables to 2 gauge and cart doesn’t work.
Quote:
If the main solenoid is clicking, then there is a wire or some color connecting keyswitch to pedal switch. Are the reversing contactor solenoids clicking?????? |
|
09-26-2020, 10:58 AM | #7 | |
Not Yet Wild
Join Date: Jul 2019
Posts: 48
|
Re: Replaced cables to 2 gauge and cart doesn’t work.
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Cart front lights work, rear lights dim and turn signals and horn doesn't work | Electric Club Car | |||
Replaced the batteries, now the radio doesn't work! Please help! | Electric EZGO | |||
36 Volt Club cart doesn't work | Electric Club Car | |||
bought a dead 2000 club car 48v replaced obc fixed charger but cart doesn't move | Electric Club Car | |||
cart doesn't work just beeps | Electric EZGO |