|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-05-2020, 10:24 AM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 39
|
RXV solenoid activation
Have a 2010 rxv that is getting no negative to the solenoid which I assume is the activation circuit on it. PCB board shows off in the programmer monitoring. Can anyone tell me what activates the solenoid? Not familiar with rxv
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2020, 10:30 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV solenoid activation
The motor controller activates the solenoid. And the controller is likely failing on of its startup tests, prohibiting the solenoid. (Or the controller is failed).
|
10-05-2020, 08:37 PM | #3 | |
Not Yet Wild
Join Date: Jun 2017
Posts: 39
|
Re: RXV solenoid activation
Quote:
Sounds like you’re up on rxv’s. I try not take them in but somehow this week I have two, this other one was posted earlier with no response, any ideas on it? Sent from my iPhone using Tapatalk |
|
10-06-2020, 12:45 AM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV solenoid activation
Not really, I never ever use the conversion kits, always a matching curtis harness. I'd be ohming out all circuits to the motor brake, on both sides of the adapter box.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G29 Solenoid activation Inputs | Electric Yamaha | |||
Solenoid activation issue. | Electric Club Car | |||
solenoid activation | Electric Club Car | |||
Solenoid activation circuit | Electric EZGO | |||
solenoid activation | Electric EZGO |