|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-17-2009, 11:09 AM | #1 |
Not Yet Wild
Join Date: Dec 2009
Posts: 8
|
Need to know what model so i can diagnose
Trying to find out what year and model so i can use the proper diagnoses charts that you guys have provided Serial#834548 Manufacture code#11L94 any help will be great THANKS
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-17-2009, 11:12 AM | #2 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Need to know what model so i can diagnose
It's a 1994, But a picture is needed to tell if it is a Marathon or a Medalist. What do the seat backs look like? If it is a single seat back, then you have a Medalist. If the body is more square and has two seat backs, then you have a Marathon.
|
|
|
12-17-2009, 11:13 AM | #3 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Need to know what model so i can diagnose
Also an easy way to tell is the battery configuration. If you have 3 batteries on each side and your electronics are in the middle, then you have a Marathon..
|
|
|
12-17-2009, 11:16 AM | #4 |
Not Yet Wild
Join Date: Dec 2009
Posts: 8
|
Re: Need to know what model so i can diagnose
WOW!!! That was fast thanks it has a single seat back and a rounded body new batterys but wont move just a click from solienoid
|
12-17-2009, 11:17 AM | #5 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Need to know what model so i can diagnose
Take a look at your F/R assembly to see if there is a burnt wire. Also trace your motor wires to see if one has broken, or burnt off the motor.
|
|
|
12-17-2009, 11:24 AM | #6 |
Not Yet Wild
Join Date: Dec 2009
Posts: 8
|
Re: Need to know what model so i can diagnose
Thanks for the info i'll start looking for burnt wires and poor connections and hope its something simple and no to expensive like a controler or motor
|
12-17-2009, 11:37 AM | #7 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Need to know what model so i can diagnose
If you don't have one already, you will need a good volt meter
|
|
|
12-17-2009, 11:42 AM | #8 |
Not Yet Wild
Join Date: Dec 2009
Posts: 8
|
Re: Need to know what model so i can diagnose
Fluke 88.... what kind of controller do i have in it DCS PDS i dont know which one
|
12-17-2009, 11:53 AM | #9 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Need to know what model so i can diagnose
You will have a series controller. No DCS until 1996 and PDS came out in 2000.
|
|
|
12-17-2009, 11:58 AM | #10 |
Not Yet Wild
Join Date: Dec 2009
Posts: 8
|
Re: Need to know what model so i can diagnose
Thanks just trying not to make any misdiagnoses and put the wrong parts in that it doesnt need
|
|
|
Similar Threads | ||||
Thread | Forum | |||
precedent model vs ds model | Gas Club Car | |||
which model is it? | Electric EZGO | |||
What model is it | Gas Club Car | |||
Is a G8 model the same as a G9? | Gas Yamaha | |||
Which model is this? | Electric Club Car |