|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-29-2009, 07:04 PM
|
#11 | |
|
let it SNOW
 Join Date: Apr 2009
Location: Marengo OHIO
Posts: 871
|
Re: Programming All Trax controller
Quote:
because the programing will effect how long it can last |
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-29-2009, 07:23 PM
|
#12 | |
|
let it SNOW
Join Date: Apr 2009
Location: Marengo OHIO
Posts: 871
|
Re: Programming All Trax controller
Quote:
when you can call alltrax and tell them you have a D&D motor and ask for the correct field map not saying the #4 field map is wrong, just a good idea to check for that motor next turn the undervoltage up to 20-25 volts, the lower the voltage goes the higher the chance you will blow the motor AND the controller next set the over voltage to 60, i know your only runnin 36 but it would be an easy swap to 48 volts the rest is up to you the higher the throtle up rate the faster it will take off throtle down doesnt do much so leave it at 5 set brake current to 0 and the turbo is up to you, but it can over heat the motor. but the little extra speed is nice but by far the best thing to do is call alltrax! and make sure my 2c |
|
|
|
|
|
12-29-2009, 07:40 PM
|
#13 |
|
Not Yet Wild
Join Date: Dec 2009
Posts: 13
|
Re: Programming All Trax controller
Cart is owned by mother-in-law who uses it on the farm for running around the property. The biggest interest is for the cart to stay together. She likes the speed she got from the stock motor. The new motor is a torque motor to handle the low speed hills and start/stop with a load (people or equipment).
I'll wait for AllTrax to come back to work! |
|
|
|
|
01-04-2010, 03:43 PM
|
#14 |
|
Not Yet Wild
Join Date: Dec 2009
Posts: 13
|
Re: Programming All Trax controller
Got a hold of Richard at All Trax. He sent me an email with an updated Field Map file #51. Also said everything else would remain the same - but he didn't ask what any of them were set at currently.
|
|
|
|
|
01-04-2010, 04:12 PM
|
#15 |
|
Not Yet Wild
Join Date: Jan 2010
Posts: 22
|
Re: Programming All Trax controller
I'm lost, but watching this topic
|
|
|
|
|
01-04-2010, 05:13 PM
|
#16 |
|
Gone Wild
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
|
Re: Programming All Trax controller
Email or call Carl at EV Drives and tell him what you need, he'll help you.
carl@evdrives.com 360-355-8372 Or maybe what you need is here. http://www.evdrives.com/Manuals/Allt...roller-Pro.pdf |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Programming Curtis Controller | Electric golf carts | |||
| Precedent Speed code programming?? | Electric Club Car | |||
| Alltrax axe programming | Electric EZGO | |||
| Programming Alltex Controller | Electric Club Car | |||
| axe 4844 / initial programming? | Electric EZGO | |||
Linear Mode
