|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-11-2010, 12:30 PM | #1 |
Not Yet Wild
Join Date: Feb 2010
Posts: 5
|
Power Wise+, parts help, needed
My charger quit working. I jumpered around the breaker on the on/off sensor board, part # 28126-GO 4, and the charger worked. I removed the board, and it looks like a resistor is bad [burnt]. Maybe breaker also.
Does any one know what the value of this resistor is, or the bands colors are. The resistor is the R1 on the board. I can't tell what the colors on mine are or were. I would like to try and fix this one before I buy another board or charger. Also what is the part # for the breaker. Thanks all Earl |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-11-2010, 12:35 PM | #2 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Power Wise+, parts help, needed
I've never tried to repair the boards - we replace them...
|
|
|
02-11-2010, 08:08 PM | #3 |
Gone Wild
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
|
Re: Power Wise+, parts help, needed
Buy a board, had the same issue a few months back and I ended up doing the same thing. Looked but never could find anyone who had the parts or would repair mine.
|
02-12-2010, 02:20 PM | #4 |
Gone Wild
Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
|
Re: Power Wise+, parts help, needed
Why cant you just look at a picture of a new board...check out the risister colors...write them down.Then just go to RadioShack an buy one?
|
02-12-2010, 02:21 PM | #5 |
Gone Wild
Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
|
Re: Power Wise+, parts help, needed
|
02-12-2010, 10:23 PM | #6 | |
Gone Wild
Join Date: Oct 2008
Location: Southwest Georgia
Posts: 610
|
Re: Power Wise+, parts help, needed
Quote:
Buy the time you chased down, located the parts and replaced all of the possible problems, you'd be better off just replacing the board. |
|
02-13-2010, 09:41 AM | #7 |
Not Yet Wild
Join Date: Feb 2010
Posts: 5
|
Re: Power Wise+, parts help, needed
thanks guys, I know that I will probably buy a new board, but I would like to see if I could fix this one, just to see if it can be done.
The relay could also be bad, and if I could find one of them, I will replace it also. Again, Thanks Earl |
02-13-2010, 09:50 AM | #8 |
Getting Wild
Join Date: Jan 2010
Posts: 122
|
Re: Power Wise+, parts help, needed
I would bring it down to radio shack, they use to have a color wheel pocket guide for resistors, was like $1.00, they are the quickest to fix, easy.
Gunny |
02-13-2010, 10:29 PM | #9 | |
Gone Wild
Join Date: Jun 2008
Location: New Braunfels,Texas
Posts: 235
|
Re: Power Wise+, parts help, needed
Quote:
|
|
03-21-2010, 01:44 PM | #10 |
Not Yet Wild
Join Date: Feb 2010
Posts: 5
|
Re: Power Wise+, parts help, needed
OK, I ordered a new board, and it should be here any day now. I found one for $49.95 Suppose to be new.
Thanks everyone Earl |
|
|
Similar Threads | ||||
Thread | Forum | |||
power wise charger | Electric EZGO | |||
Power Wise Charger's | Golf Carts and Parts | |||
Power Wise Parts | Electric EZGO | |||
Power Wise charger | Electric EZGO | |||
power wise QE charger | Electric golf carts |