|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-30-2010, 10:52 PM | #1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 2
|
wiring new headlights and tail lights
I have a 36volt Medalist and I bought some headlights and tail lights at Walmart. The directions that came with them isn't very clear to me. That being said, all I'm looking for is the information to wire all the lights into a single switch. The tail lights came with a 2 prong toggle switch and the headlights have a 3 prong rocker switch. If I just want one switch what do I need to buy and how many amps should it be. I'm sure these are very redundant questions, but the only info I have come across is for the more expensive complete light kits. Any help on this will be greatly appreciated.
thanks, foghat |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-01-2010, 02:10 PM | #2 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: wiring new headlights and tail lights
basically is what you will do is just put your taillights wires on your wires for your headlights.
|
10-01-2010, 06:42 PM | #3 |
Not Yet Wild
Join Date: Sep 2010
Posts: 2
|
Re: wiring new headlights and tail lights
Thanks for the reply. If I had scoured the previous posts, as I did last night, I wouldn't had to post the problem. Great site and thank you very much for replying.
foghat |
|
|
Similar Threads | ||||
Thread | Forum | |||
Club car tail lights | Electric Club Car | |||
headlights and tail lights | Electric EZGO | |||
tail lights on 99 | Gas Club Car | |||
Wiring tail lights - '92 Marathon | Electric EZGO | |||
tail lights ? | Gas EZGO |