lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-01-2011, 05:56 PM   #1
plumdog1
Not Yet Wild
Club Car
 
Join Date: Jun 2011
Location: Upstate New York
Posts: 9
Post instaling an altrax controller

I have a 2000.5 clubcar ds 48v .The instructions say on the pd plus installation say the regen solenoid should be removed,also said to tape up other two wires, Where is this located ? i couldn`t find in the clubcar wiring schematics, It looks like my cart has two solenoids ,one on each side of it`s fried GE controller.
plumdog1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-02-2011, 09:34 AM   #2
OLD MEC
Gone Wild
 
OLD MEC's Avatar
Club Car
 
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
Default Re: instaling an altrax controller

If I am in doubt about wiring changes I go to sourse and in this case I would be contacting ALLTRAX Company that has always been very helpful.
OLD MEC is offline   Reply With Quote
Old 06-02-2011, 02:10 PM   #3
Golfdog
Gone Wild
 
Join Date: Dec 2010
Posts: 486
Default Re: instaling an altrax controller

Quote:
Originally Posted by plumdog1 View Post
I have a 2000.5 clubcar ds 48v .The instructions say on the pd plus installation say the regen solenoid should be removed,also said to tape up other two wires, Where is this located ? i couldn`t find in the clubcar wiring schematics, It looks like my cart has two solenoids ,one on each side of it`s fried GE controller.
The Alltrax Controller does not use the regen solenoid (the one with the wire coil attached) the two wires that should be taped up (not taped together) are the ones that go to the two small posts on that solenoid. The document section of (www.alltraxinc.com) under Club Car has the wiring diagram for the pd plus
Golfdog is offline   Reply With Quote
Old 06-02-2011, 03:33 PM   #4
plumdog1
Not Yet Wild
Club Car
 
Join Date: Jun 2011
Location: Upstate New York
Posts: 9
Default Re: instaling an altrax controller

Thanks for the help.
plumdog1 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Altrax Controller Recommendations Electric EZGO
4845 ALTRAX 400 AXE Prog. Controller Golf Carts and Parts
Altrax Electric EZGO
altrax??????????? Electric EZGO
I added my new Altrax Controller 400amp NO DIFFERENT Electric Club Car


All times are GMT -5. The time now is 10:30 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.