|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-22-2012, 10:15 PM | #11 |
Getting Wild
Join Date: Jul 2012
Location: TX
Posts: 80
|
Re: Built my own speaker pods
I used #8 stainless screws to mount them. If the mounting holes for the speaker do not line up with the "rim" of the cap just cut a piece of 6" pipe about 1 1/2" long and glue it and push it in so that the edges are even. Let it dry and attach the speakers with the stainless screws and attach the grilles. In my case the grilles were part of the speaker.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-23-2012, 10:22 PM | #12 | |
Gone Wild
Join Date: Oct 2010
Posts: 374
|
Re: Built my own speaker pods
Quote:
|
|
10-24-2012, 11:13 AM | #13 |
Gone Wild
Join Date: Jul 2012
Location: Sw Florida
Posts: 298
|
Re: Built my own speaker pods
Good idea !
|
10-24-2012, 10:19 PM | #14 |
Getting Wild
Join Date: Aug 2012
Location: Birmingham, AL
Posts: 110
|
That is an awesome idea. Seems pretty simple.
|
10-25-2012, 09:14 AM | #15 |
Getting Wild
Join Date: May 2011
Location: South GA
Posts: 110
|
Re: Built my own speaker pods
I did the exact same thing last year except I screwed my pipe caps to the floor board.
|
10-25-2012, 08:07 PM | #16 |
Getting Wild
Join Date: Jul 2012
Location: TX
Posts: 80
|
Re: Built my own speaker pods
|
10-25-2012, 08:09 PM | #17 |
JUMP IT!!
Join Date: Apr 2012
Location: colorado
Posts: 518
|
Re: Built my own speaker pods
sick! you should take it apart and post some pics of the inside to share your great idea!
(if you want) |
10-25-2012, 10:03 PM | #18 |
Getting Wild
Join Date: Jul 2012
Location: TX
Posts: 80
|
Re: Built my own speaker pods
I'll do that this weekend.
|
10-26-2012, 07:03 AM | #19 |
Getting Wild
Join Date: May 2011
Location: South GA
Posts: 110
|
Re: Built my own speaker pods
I had to glue the pipe inside of mine to have enough to mount the speakers to. I just drilled a small hole in the pipe cap for the speaker wire and put about 3 screws through it into the floorboard and then mounted the speaker to the pipe cap.
|
10-26-2012, 07:27 AM | #20 |
Getting Wild
Join Date: Jul 2012
Location: TX
Posts: 80
|
Re: Built my own speaker pods
I had to add some pipe into mine as well to screw the speaker to. Drilled two holes, one for the wire and one for the mounting bolt.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Custom Speaker Pods for the Club Car DS | Design Center | |||
Introducing Custom Speaker Pods | Electric EZGO | |||
Custom Speaker Pods for EZ Go | Design Center | |||
Introducing Custom Speaker Pods | Electric Club Car | |||
EZ-GO Speaker Pods | Gas EZGO |