Won't Stop Moving

[JohnnieB]

Originally Posted by yurtle

If I'm looking at it right, electrically, there's no difference between position 0 and position 1 on the high current loop?

Except for the solenoid contacts being opened by the pedal microswitch.

[Stehle]

Hey! Sorry it took so long to reply back.

We ended up replacing both the switch (which tested good out of the buggy) & the solenoid which seemed to remedy the problem.

The switch roller guide (bottom lever) was bent & could not make the needed contact when pedal was in the up position.

We still had the problem with the new switch, so my mechanic replaced the solenoid also and that did the trick.

Thanks again!