|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
02-04-2018, 10:55 AM
|
#1 |
|
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,048
|
'96 to '97 wiring harness compatibility
I have a 96 DS, 48 (volt series), runs well, but frame damage. I have a 97 DS (48v sepex regen) with a good chasis, bad controller.
If I were to move the motor and controller, switch, etc., from the 96 DS to the 97 DS chasis, would I have to also move the wiring harness or could I simply use the harness that is already on the 97? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-04-2018, 10:57 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: '96 to '97 wiring harness compatibility
You would move everything including the OBC and wire harnesses.
|
|
|
|
|
02-04-2018, 11:19 AM
|
#3 | |
|
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,048
|
Re: '96 to '97 wiring harness compatibility
Quote:
I thought since the 89-03 wiring diagram was the same, it might work. |
|
|
|
|
|
02-04-2018, 11:26 AM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: '96 to '97 wiring harness compatibility
The swap is from Sepex to series. Everything goes except the V glide and key switch
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB: G2/G9 gas wiring harness | Golf Carts and Parts | |||
| Wiring Harness Help | Electric EZGO | |||
| New Wiring Harness | Gas Club Car | |||
| wiring harness id, PLEASE HELP | Electric EZGO | |||
| G16 wiring harness with key $50 | Golf Carts and Parts | |||
Linear Mode
