|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
09-17-2020, 03:38 PM | #1 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Curtis 1234C Factory level access only / None at OEM
Hello I have a problem with my 1234C controller.
I can only change the parameters in the factory level. OEM no parameters are displayed. I have exported the parameters via 1314-4402 and it stands for writing and reading information factory inside. Is there a way to change that? OEM level? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-18-2020, 07:58 AM | #2 |
Not Yet Wild
Join Date: May 2015
Posts: 10
|
Re: Curtis 1234C Factory level access only / None at OEM
ups can be deleted.
number swapped. it is a 1243C not a 1234C |
|
|
Similar Threads | ||||
Thread | Forum | |||
Increase RXV Torque with Factory Level Programming Station? | Electric EZGO | |||
Dealer level Curtis programmer for sale | Golf Carts and Parts | |||
WTS Curtis Upgrade 1313K-4331 OEM Level Handset | Golf Carts and Parts | |||
Does Curtis handset 1313K offer OEM access? | Gas EZGO | |||
CURTIS OEM Level Handheld Programmer, Capability | Electric Club Car |