|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
11-16-2010, 04:20 PM | #1 |
Not Yet Wild
Join Date: Oct 2010
Location: Central Ohio
Posts: 8
|
Robin 295 head with high rev valve kit
Bought this pre MCI head from Alabama Golf Carts Inc. a while back, it is stripped (no moving parts). Plus I have a high rev stainless steel valve kit from Fast Fred that has never been installed. If your hot rodding a factory Ezgo engine you're gonna want these. $200.00 plus shipping. if you're anywhere near central Ohio local pick-up will work.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-16-2010, 10:23 PM | #2 |
Getting Wild
Join Date: Nov 2010
Location: California
Posts: 93
|
Re: Robin 295 head with high rev valve kit
I need a whole engine with carbs. 350cc preferred but 295 can be considered.
|
11-17-2010, 07:37 AM | #3 |
Not Yet Wild
Join Date: Oct 2010
Location: Central Ohio
Posts: 8
|
Re: Robin 295 head with high rev valve kit
I'll be selling a complete 295 soon, Its still in the cart. It's coming out to make room for a big block.
|
11-17-2010, 04:55 PM | #4 |
Getting Wild
Join Date: Nov 2010
Location: California
Posts: 93
|
Re: Robin 295 head with high rev valve kit
Good. Let me know.
|
12-04-2010, 12:44 PM | #5 |
Not Yet Wild
Join Date: Jan 2010
Posts: 29
|
Re: Robin 295 head with high rev valve kit
Do you still have this item. I have a gasoline 2004 txt, would these fit?--Thank you--Bob
|
12-05-2010, 10:49 PM | #6 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: Robin 295 head with high rev valve kit
yes the valves will fit ,the head will fit if you have a motor that doesnt have the exhaust manifold built into the head.
casey |
12-06-2010, 09:10 AM | #7 |
Not Yet Wild
Join Date: Jan 2010
Posts: 29
|
Re: Robin 295 head with high rev valve kit
Thank you, I will check. If installed, any other parts needed?
|
12-06-2010, 10:10 AM | #8 |
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: Robin 295 head with high rev valve kit
you will have to pull the clutch so u will need a removal tool, and a few gaskets a headgasket,exhaust manifold gaskets(not really needed if you dont mess up the old ones), intake gaskets,valve stem seals,camshaft seal and camshaft sideplate seal.thats if you want to do it right and be sure of not having oil leaks
|
12-08-2010, 02:28 PM | #9 |
Not Yet Wild
Join Date: Oct 2010
Location: Central Ohio
Posts: 8
|
Re: Robin 295 head with high rev valve kit
I do still have the head and valve kit for sale, If anyone is interested in doing some trading I could use some G2 parts....... just throwing that out there
|
12-17-2010, 06:19 PM | #10 |
Not Yet Wild
Join Date: Jan 2010
Posts: 29
|
Re: Robin 295 head with high rev valve kit
Sorry I haven't gotten back to you, golf cart was being painted. Its a 2004 ezgo, looks like manifold is built into the head,so I guess it's a non-fit---Bob
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Flat head valve lash?? | Gas Club Car | |||
G9 head and valve ? | Gas Yamaha | |||
85 EZGO robin engine valve adjustments | Gas EZGO | |||
Robin EC25-2PG head shave | Gas EZGO | |||
Wanted: Robin (ezgo) 295cc cylinder head | Golf Carts and Parts |