|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-15-2024, 07:42 PM | #11 |
Not Yet Wild
Join Date: Oct 2024
Location: missouri
Posts: 16
|
Re: 2009 ezgo txt solenoid wont click
this is what i learned tonight i was following the testing doc i found on the internet - got down to where i am testing the F/R switch, this is what i found
J1 Pin 10 With F/R Switch to Neutral, must be Pack Voltage - If not, check wiring or backup beeper for an open or missing condition J1 Pin 10 With F/R Switch to Reverse, must pulse to approximately 0 volts (should hear beeper) - If not, check wiring or backup beeper for open condition J!/10 has power on it like it states J1/10 with F/R switch in R should move to 0 volts that never happens just holds pack voltage. i am pretty sure the ITS is bad also i dont see 12-14 volts on pin 4 - white wire ever. i am starting to wonder if the controller i have is any good... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-16-2024, 08:09 AM | #12 | |
Getting Wild
Join Date: Aug 2024
Location: Columbia, SC
Posts: 96
|
Re: 2009 ezgo txt solenoid wont click
Quote:
At one point in my process when I was on a third different controller install and new heavy duty solenoid install, I was in a spot similar to yours here. Everything ws installed correctly, all voltages checked out and the cart would not run and no reverse buzzer. Then I checked the reed switch wiring and it was faulty. Even if your reed switch is bypassed, you still need to have your reed switch bypass wire off the main wiring harness (pin J4, the wire runs out of the main harness loom, might have a spade connected on it) wired to a constant battery positive source. I wired that wire from the main harness to the bypassed reed switch small wire coming out of the charging receptacle and that was the culprit. Reverse buzzer back, cart running. You may already know this, but when I saw your post, I thought I would share my fix. It was so simple but easily overlooked, so if you haven't checked it, that might be your issue. |
|
10-16-2024, 10:42 AM | #13 |
Not Yet Wild
Join Date: Oct 2024
Location: missouri
Posts: 16
|
Re: 2009 ezgo txt solenoid wont click
I do have the red/white wire connected to the positive side on the battery - I have a Lithium battery I dont have the charging receptacle wired up - I dont think I need that at this point - but yes I do understand the frustration - LOL! -- thing is making me crazy - I may send back the controller I have sense its not testing right but I am not sure that is whats wrong with it. good thing I didnt pay much for it :)
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO wont go, No click from solenoid | Electric EZGO | |||
2009 EZGO RXV No Solenoid Click | Electric EZGO | |||
2009 ezgo rxv wont click, move, make noise, nothing !! | Electric EZGO | |||
95 Ezgo DCS, no solenoid click, wont go | Electric EZGO | |||
94 EZGO wont go solenoid no click | Electric EZGO |