Lights for EZ GO 2010 / 2011 Sport 11

[cafeexpress]

The parking light reflectors are easily replaced with parking lights .
Optronics - # MC 36AS - sold at Advance auto parts .You can use either the lenz that came with your EZ GO or the lenz provided with the light you bought . I used my original EZ GO lenz . (Removed by holding plastic nuts with pliers ) Placed the light behind the frame of the golf cart ,Used stainless screws 1/8 inch longer to attach the lenz from the front thru the frame into the light fixture . The mounting stud on back of the light provides an excellent ground to the frame with a couple of lugs and a piece of wire . Ground to the center of your cart where ( 3 ) bolts are thru the frame ,approx 2 ft of wire for ea. light . Wire the main + wires from the back of the light to the main ignition switch . Blue connector - Pull connector off lug to check while your lights are on. To add tail lights ,you can add a + wire that will reach the rear of the cart . Lights for rear - Optronics - 2.5 Red LED MCL 527RS- These connections require soldering or a specal snap on harness w/ 2 wires from the push on connector (One to ground ) . Adding extra LED under glow lights are also available to add at this point. To access the panel containing your main switch ,take a small diameter ,ie: the back end of a very small drill and push the center out of the ouick snap (2) button fasteners . I used large diameter short screws to replace panel . Cafeexpress4@Bellsouth.net