lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-02-2018, 12:09 PM   #1
Johnmaster
Not Yet Wild
 
Join Date: Jun 2018
Posts: 42
Default ezgo rxv wiring diagram

Looking for an ezgo rxv wiring diagram. I have a 83A21102A part number motor controller im trying to swap into a tomberlin vanish utv. pretty sure 2010 ezgo rxv is the year im looking for. The 23 pin connector is the same on each Danaher controller but the wires are in different positions on the tomberlin compared to the ezgo. Figured it would be plug and play but not so.
Johnmaster is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-02-2018, 12:38 PM   #2
usgicollector
Gone Wild
E-Z-GO
 
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 2,552
Default Re: ezgo rxv wiring diagram

See if this helps.
Attached Images
File Type: jpg RXV after 5-Dec-2009.JPG (128.5 KB, 0 views)
usgicollector is offline   Reply With Quote
Old 07-02-2018, 02:57 PM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,441
Default Re: ezgo rxv wiring diagram

I don't know all about any ac powered tomberlin, but the rxv controller is very picky about passing all startup tests, and I'm not sure you could ever get all tests to pass. Have you ever seen/heard of someone else get a Rxv controller to work in a tomberlin?
cgtech is offline   Reply With Quote
Old 07-02-2018, 04:02 PM   #4
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
Default Re: ezgo rxv wiring diagram

cgtech, you are correct. The earlier Tomberlin UTVs used an ACD (Danaher) controller that looks very similar to the RXV Danaher, but the internal programming is quite different. If he had the software for the industrial ACD controller, it might allow him to erase and reconfigure the RXV controller for his Tomberlin. We don't know what sort of throttle or regen braking inputs the Tomberlins controller was set for, or how the other inputs and outputs are configured. That would need to be known so that the RXV controller could possibly be reconfigured. The ACD industrial controller of that era was very configurable, but they have been obsolete for too long. Little supportive information is available these days. Attempts to find the information routes searchers to the newer controllers that replaced the obsolete ones.
BobBoyce is offline   Reply With Quote
Old 07-02-2018, 10:09 PM   #5
Johnmaster
Not Yet Wild
 
Join Date: Jun 2018
Posts: 42
Default Re: ezgo rxv wiring diagram

I appreciate the responses, most likely giving up on this controller swap. Going to try to have the oem controller rebuilt and install it. if still no go, parting it out or converting the entire drive system to aftermarket dc motor/controller or gas.
Johnmaster is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
91-02 EZGO wiring diagram Gas EZGO
wiring diagram for 97 ezgo gas Gas EZGO
ezgo wiring diagram Electric EZGO


All times are GMT -5. The time now is 07:05 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.