|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-15-2011, 11:09 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2011
Location: Kanata
Posts: 6
|
G1 - to lift or not?
Looking to run a low profile tire with a 12" wheel on my G1 similar to these http://www.eccustomgolfcarts.com//12...re-p-1157.html
What size of lift will be required to fit them? Or can the wheel wells be clearanced to fit them? How much further than stock will the stick out with the 2+5 offset? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-15-2011, 07:17 PM
|
#2 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: G1 - to lift or not?
Stock wheel is 3.5/3.5 offset, that means 3.5 inch in, and out, from the hub face to the rim lip. So it will stick out about 1.5" more (3.5>>>5) depending on the tire. I can tell you 20x8-8 (lawn tires) fit on most yamaha, but can't tell you exactly if those will. Check the onroad forum they do a lot of that too, if nobody is on here.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Spindle Lift vs Drop Axle Lift | Lifted Golf Carts | |||
| Is Strecth Plastic LT lift a good Lift for EZ GO | Lifted Golf Carts | |||
| Spindle Lift or Drop Axle Lift? Which one? | Lifted Golf Carts | |||
| Axle lift vs. Spindle lift- Pros and Cons | Lifted Golf Carts | |||
| Axle lift vs. Spindle lift- Pros and Cons | Electric EZGO | |||
Linear Mode
