|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-12-2009, 09:54 AM | #1 |
Not Yet Wild
Join Date: Mar 2009
Posts: 13
|
G19 no power, dead
Had controller rebuilt, I have 48v to the solenoid and no ground. I hooked a ground wire from the batteries to the ground post and the solenoid closed and still this does nothing.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-12-2009, 12:34 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G19 no power, dead
Man I wish I could be more help online. You have to follow the paths for testing. With a volt meter, test for positive voltage at/fuse/run tow switch/key switch/micro "stop" switch. Let me know if the check out and well try something else. Dave
|
12-12-2009, 12:39 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: G19 no power, dead
I'm Sorry.......... I can't help it. |
12-14-2009, 01:18 PM | #4 |
Not Yet Wild
Join Date: Mar 2009
Posts: 13
|
Re: G19 no power, dead
I jumped the buzzer its good, has 49 volt, but its not getting and ground. Jumped the DC motor its good, ohmed the foot contactor its good. just got the controller back from being rebuilt. I have 49v to everything but I can't get ground to nothing, dead. my question is. does the ground make up in the controller, if it does. Then the controller is still bad. Anybody have a answer ?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
48V G19 Dead | Electric Yamaha | |||
dead 89 | Gas EZGO | |||
dead ez-go | Electric EZGO | |||
48v CC dead,everythings dead | Electric Club Car | |||
98 TXT Dead | Electric EZGO |