|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-29-2010, 12:24 AM | #1 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
PB-6 work with 36 volt EZGO?
I am toying around with a project unrelated to EZGO golf carts but it uses the electronics from a 04 EZGO 36 volt series cart. I need to get rid of the stock potentiometer and go with a regular style pot box.Will a Curtis PB-6 work with this system?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-29-2010, 09:58 AM | #2 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: PB-6 work with 36 volt EZGO?
I can't confirm this as having not tried it but, it should work. U will use the white and black wire from the controller to the white and black wire to the PB-6. Both the ITS and Potbox send a resitsance signal to the controller within the same perimeters 0-5000 ohms.
|
01-29-2010, 10:02 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: PB-6 work with 36 volt EZGO?
I haven't tried it either but doubt it will work. If 0-5k ohms and ITS were the same then Alltrax would not give both as a program option in their controllers ...... just a thought? You may need a different controller? Which controller do you have?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Will this motor work on a 1992 ezgo 4 stroke | Gas EZGO | |||
99 ezgo work horse | Big Block Talk! | |||
1987 EZGO Starter Generator.. which ones work | Gas EZGO | |||
ezgo 36 volt charger min volt for charge? | Electric golf carts | |||
1991 EZGo Electric: Reverse Doesn't Work? | Electric EZGO |