Spline engagement

buddy48 · 04-12-2010, 10:12 AM

It sure doesn't seem that there is much engagement length between the motor spline and the input shaft on the differential. I think mine cant be more that 3/8"~1/2". I could be wrong, but it sure would seem like there should be more than that. Any thoughts on this? My cart is a 94.5 Ezgo series cart.

buddy48 · 04-12-2010, 08:04 PM

anyone know how much??

DVR · 04-13-2010, 03:17 PM

my 05 had about an inch if I recall correctly. not sure if yours is different but the 3 little bolts that hold the motor in place worry me much more than spline engagement.

04-12-2010, 10:12 AM	#1
buddy48 Gone Wild Join Date: Feb 2010 Location: GA Posts: 180	Spline engagement It sure doesn't seem that there is much engagement length between the motor spline and the input shaft on the differential. I think mine cant be more that 3/8"~1/2". I could be wrong, but it sure would seem like there should be more than that. Any thoughts on this? My cart is a 94.5 Ezgo series cart.

04-12-2010, 08:04 PM	#2
buddy48 Gone Wild Join Date: Feb 2010 Location: GA Posts: 180	Re: Spline engagement anyone know how much??

04-13-2010, 03:17 PM	#3
DVR Gone Wild Join Date: Oct 2009 Location: sc Posts: 187	Re: Spline engagement my 05 had about an inch if I recall correctly. not sure if yours is different but the 3 little bolts that hold the motor in place worry me much more than spline engagement.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
K1091 Two Stroker--Clutch engagement and RPM questions	Gas EZGO
Clutch Engagement and Uphill Power Loss	Gas Club Car
What Spline Motor In My 83 CC	Electric Club Car
Clutch Engagement	Gas Yamaha
G22 Clutch engagement	Electric Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum