|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
10-23-2018, 09:12 PM
|
#11 |
|
Not Yet Wild
Join Date: Sep 2018
Posts: 8
|
Re: G22 with New XCT48400
Put the Moric back on this evening and the cart works perfect. Basically I had a bad ignition switch that was missed by a so called golf cart mechanic. I don’t know what’s going on inside the alltrax controller, but to me it looks like the electrical signal to the motor is pulsing. It constantly sends the electricity to the motor then stops. It would literally do it over and over until you turn the key off.
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| SLOW DCS after XCT48400 upgrade | Electric EZGO | |||
| Alltrax XCT48400 & 200 HD solenoid | Golf Carts and Parts | |||
| Alltrax XCT48400 IQ or TXT48 $300 | Golf Carts and Parts | |||
| Alltrax XCT48400 PDS Setting Questions | Electric EZGO | |||
| 2009 Precedent XCT48400 Alltrax install | Electric Club Car | |||
Threaded Mode