Quote:
Originally Posted by Patela2oh
At a minimum your reducer will have 48/36 v input (battery pack +) , common negative (battery pack -) and 12v xx amp output (accessories). You can use the same ground /- wire for accessories and the pack.
A few better ones will also have key switch (connects to positive output of the key) and a constant output even if key is off (for radio memory / clock etc).
From there it's how busy / easy you want to get. If you have a lot of stuff you can have a small fuse box (distributes power) and buss bar (collects power after accessories and runs back to battery negative).
Look at my post "project unnecessary " under members rides and you will see a wiring diagram and pics etc
White power in , green / black power out
Sent from my iPhone using Tapatalk
|
look at that mess of wires lol