Modify fuji/robins 350, 295 head?

bhfear · 03-24-2009, 11:56 PM

I have built a 350 from the ground up with the 295 head, Hi lift cam from lvs sales (best price on that) intake exhasut, 350 carb, .25 over, it is a good running motor, but it does run better with racing fuel, and when its warmed up,

dirtysouth · 03-25-2009, 12:02 AM

Nice...

Did you lose any torque?

bhfear · 03-25-2009, 12:19 AM

Well I am running the comet 1190, and then 15 degree clutch with the short belt, so I made up for some of the lost torque,

dirtysouth · 03-25-2009, 12:22 AM

Cool. Did you notice a big diff. over stock?

bhfear · 03-25-2009, 12:29 AM

Over stock yes, more hp, torque, speed, but what it cost to build this motor I woudl just go v twin and be done with it, but it is cool

dirtysouth · 03-25-2009, 12:37 AM

Quote:

Originally Posted by bhfear

Over stock yes, more hp, torque, speed, but what it cost to build this motor I woudl just go v twin and be done with it, but it is cool

Good to know... Thanks fer the info.

dirtysouth · 03-25-2009, 12:38 AM

Quote:

Originally Posted by bhfear

Over stock yes, more hp, torque, speed, but what it cost to build this motor I woudl just go v twin and be done with it, but it is cool

My bad... Yes, It is COOL!

cpu77 · 03-25-2009, 07:32 AM

Quote:

Originally Posted by bhfear

Over stock yes, more hp, torque, speed, but what it cost to build this motor I woudl just go v twin and be done with it, but it is cool

This is my opinion as well. I may sell my setup and my 295 motor to buy a big block. I would bet it's making 16-17hp?

cpu77 · 03-25-2009, 08:25 AM

Quote:

Originally Posted by bhfear

Well I am running the comet 1190, and then 15 degree clutch with the short belt, so I made up for some of the lost torque,

I just bought a 28 degree clutch and hope that helps down low. I was not aware there was another option!

scottyb · 03-25-2009, 08:27 AM

Have you tried the shorter belt....?

03-25-2009, 12:02 AM	#12
dirtysouth Gone Wild Join Date: Feb 2009 Location: P-COLA Posts: 1,176	Re: Modify fuji/robins 350, 295 head? Nice... Did you lose any torque?

03-25-2009, 12:19 AM	#13
bhfear EZ-GO-N Join Date: Dec 2007 Location: Geneseo, IL Posts: 505	Re: Modify fuji/robins 350, 295 head? Well I am running the comet 1190, and then 15 degree clutch with the short belt, so I made up for some of the lost torque,

03-25-2009, 12:22 AM	#14
dirtysouth Gone Wild Join Date: Feb 2009 Location: P-COLA Posts: 1,176	Re: Modify fuji/robins 350, 295 head? Cool. Did you notice a big diff. over stock?

03-25-2009, 12:29 AM	#15
bhfear EZ-GO-N Join Date: Dec 2007 Location: Geneseo, IL Posts: 505	Re: Modify fuji/robins 350, 295 head? Over stock yes, more hp, torque, speed, but what it cost to build this motor I woudl just go v twin and be done with it, but it is cool

03-25-2009, 08:27 AM	#20
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Modify fuji/robins 350, 295 head? Have you tried the shorter belt....?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Robins MCI Engine	Gas EZGO
Robin/fuji EC17DS	Gas EZGO
robins engine	Big Block Talk!
2 Stroke, how can I modify to make faster?	Gas EZGO
Modify Driven Clutch	Gas Yamaha