|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-23-2018, 12:26 PM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 9
|
Oil priming fresh robins rebuild
I just got done rebuilding 295 Robin's engine and was wanting to know what would be the best way to prime the engine oil?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2018, 02:50 PM | #2 |
Getting Wild
Join Date: Nov 2016
Location: michigan/georgia
Posts: 133
|
Re: Oil priming fresh robins rebuild
A pump oil can or squize bottle in the hole under the vavle cover flywheel end.forces oil around cam to pump then crank without plugs and watch it pump
|
05-24-2018, 06:08 AM | #3 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Oil priming fresh robins rebuild
Put your shop vac over the oil passage under the valve cover on fly wheel side and turn motor over with spark plugs wires unhooked it will pull oil up in a couple revolutions
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G16 fresh rebuild knocking | Gas Yamaha | |||
fresh 2pg rebuild motor knock | Gas EZGO | |||
New Carb adjustment on fresh rebuild. | Gas EZGO | |||
G2 Motor- fresh rebuild | Golf Carts and Parts | |||
fresh rebuild problem | Gas EZGO |