09-01-2009, 05:04 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Location: Arkansas
Posts: 16
|
F&R switch question?
On my 84 marathon,is the swich rebuildable. Can this be bought as a direct replacement unit? When I start and stop alot, The cart won't start. Can slap the panel under my legs, and it will start. Would this direction switch cause this? Please help! Very FRUSTRATING!!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-02-2009, 06:43 AM | #2 |
Gone Wild
Join Date: Nov 2007
Location: OKOBOJI, IA.
Posts: 247
|
Re: F&R switch question?
sounds to me like a loose wire.
i dont think the F/R switch would cause that, have you checked all the connections coming in to the switch? |
09-02-2009, 03:33 PM | #3 |
Not Yet Wild
Join Date: Aug 2009
Location: Arkansas
Posts: 16
|
Re: F&R switch question?
What a pain! I checked and cleaned every connection on the whole cart. Same problem. Gets hot, won't start unless I tap the panel down where the coil is located. Checked the pulse(152ohm across red and black). Regulator checked good also. Checked across the orange and green on the coil(4.2ohm). My geuss is the coil, but felt it when this happened and it was cool to the touch. Somebody have any suggestions?
|
03-20-2012, 05:14 PM | #4 |
Gone Wild
Join Date: Feb 2010
Posts: 551
|
Re: F&R switch question?
Check your Key Switch if the metal prongs are loose.
matt |
03-20-2012, 07:09 PM | #5 |
Not Yet Wild
Join Date: Sep 2011
Location: Brewster, Ohio
Posts: 35
|
Re: F&R switch question?
Sounds like the solenoid is getting a condition called "heat soak".
|
03-21-2012, 06:53 AM | #6 |
Not Yet Wild
Join Date: Mar 2012
Posts: 5
|
Re: F&R switch question?
I had the same problem two days ago. Drove me nuts, would start once and awhile.
I would tap the area around the key and reverse switch and off it would go. I also check all my connections and then decided to take compressed air and blow out the switches behind all the wires. My problem was just a lot of dust on my switches. Works perfect now. Worth a try. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Key switch & Kill switch question | Gas Club Car | |||
Micro switch on fwd and rev switch has bee removed | Electric EZGO | |||
Newby question- Accelerator Switch placement | Electric EZGO | |||
Upgrade FNR switch, question | Electric EZGO | |||
Dumb question/97 EZGO switch | Electric EZGO |