|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-13-2012, 08:36 PM | #1 |
Not Yet Wild
Join Date: Jan 2012
Posts: 39
|
2pg hei conversion
So I followed the instructions to a t. When i push the pedal i get 11.26v to both sides of the coil. I get 12 v to the module but i have no spark at all. Do I have a bad module?
Sent from my DROID BIONIC using Tapatalk 2 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-13-2012, 08:56 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 2pg hei conversion
Try switching the pulsar wires. Make sure the module is grounded too. Not just the negative but the bolt hole ground.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Is there a conversion for 5k-0 pot box | Electric Club Car | |||
98 ez go conversion to 48 v.... | Electric EZGO | |||
ds conversion 4(12) to 6(8) | Electric Club Car | |||
36v to 48v conversion | Electric Club Car | |||
DC to AC conversion | Electric EZGO |