lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Lifted Golf Carts
Lifted Golf Carts Off-Road Golf Carts.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-08-2012, 01:12 PM   #1
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default E-Z-GOing 00 TXT Gasser Build

Well, I guess I've finally done enough to my cart that I can post a few pics.

I've had the cart about 6 months. Got it from a buddy that bought it new, so was not abused too bad...other than not being kept up on service like it should have.
ThatGuyJake is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-08-2012, 01:14 PM   #2
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Here is how she started out stock. Pulled the hubcaps off first thing and then plastidipped the wheels and front emblem.
ThatGuyJake is offline   Reply With Quote
Old 12-08-2012, 01:26 PM   #3
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Had a new stock axle which I traded out with a fellow member for his 4" (?) drop axle and then flipped the rear axle.



ThatGuyJake is offline   Reply With Quote
Old 12-08-2012, 01:29 PM   #4
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Then added the new wheels...well, would have liked to anyway!


Here's the lift with the stock 8" wheels:

ThatGuyJake is offline   Reply With Quote
Old 12-08-2012, 01:35 PM   #5
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Then picked up a set of 20x10x10's from a fellow member (another great thing about this site!).

They are GTW 10" Wheels with Carlisle All Trail II's. I THOUGHT that I wanted 22" tires, but the price was on budget for these. Now that I have them on, I think the fit the lift height really well.



ThatGuyJake is offline   Reply With Quote
Old 12-08-2012, 01:46 PM   #6
KENNETHC
Gone Wild
 
KENNETHC's Avatar
Yamaha
 
Join Date: Aug 2009
Location: Cedar Hill, Missouri
Posts: 288
Default Re: E-Z-GOing 00 TXT Gasser Build

looks very nice.
KENNETHC is offline   Reply With Quote
Old 12-08-2012, 01:56 PM   #7
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Other things that I've done:

LED "stock" taillights that I found on ebay
LED accessory light under the cupholder that shows light on the F&R lever and floorboard
New battery

In the works:
I have a couple of 6.5" speakers to mount up front and an amp
A fuse block to tie all accessories into
A new front cowl to replace the creased/damaged one
PAINT!
ThatGuyJake is offline   Reply With Quote
Old 12-08-2012, 01:59 PM   #8
Redlig
Getting Wild
Club Car
 
Join Date: Nov 2012
Location: jacksonville
Posts: 90
Default Re: E-Z-GOing 00 TXT Gasser Build

how did you plasti dip the wheels? they looked pretty good and i have some nice wheels but have poor finish it sounds like a cool idea for them
Redlig is offline   Reply With Quote
Old 12-08-2012, 02:50 PM   #9
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Quote:
Originally Posted by Redlig View Post
how did you plasti dip the wheels? they looked pretty good and i have some nice wheels but have poor finish it sounds like a cool idea for them
well, plastidip was great for the commitment-phobe like myself. I wasn't sure how I would like it, so instead of paint...I used the spray can plastidip where I could peel it back off if I changed my mind. I posted something on it under the "Design Center" somewhere. But its definitely temporary, they say a year to 18 months max on the finish before it starts peeling/scuffing pretty good. So if you are certain you want to paint...just use paint IMO
ThatGuyJake is offline   Reply With Quote
Old 01-10-2013, 05:06 PM   #10
ThatGuyJake
Getting Wild
 
ThatGuyJake's Avatar
E-Z-GO
 
Join Date: Aug 2012
Location: Nashville
Posts: 88
Default Re: E-Z-GOing 00 TXT Gasser Build

Been working on getting some music in the cart. I bought a cheap set of 6.5" pyle marine speakers and a pyle amp off of Amazon. Prob have about $30 in it.

Bought some 6" PVC caps at Lowes and painted them black with a rattle can. Does the trick.
[/url]









Still need to mount the amp to the side of the glove box and run the hot wire back to the fuse block (and wire up the fuse block). Then clean up the wiring under the cup holder. Slowly but somewhat surely....
ThatGuyJake is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Lifted Golf Carts


Thread Tools
Display Modes


Similar Threads
Thread Forum
EZGO Build Block Build - CPP kit, Allsports LT Big Block Talk!
Considering a gasser Gas Yamaha
old gasser Gas EZGO
New Build on a 02 EZ Gasser Lifted Golf Carts
I just got my gasser Gas Club Car


All times are GMT -5. The time now is 03:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.