|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-05-2018, 08:33 AM | #1 |
Not Yet Wild
Join Date: Dec 2016
Posts: 11
|
What should setting be on DPI charger
I bought the new Gen iv DPI Accusense charger. What should switches be set to for 6 Trojan T-875 on Yamaha G29?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-05-2018, 10:42 AM | #2 |
Not Yet Wild
Join Date: May 2017
Location: Carlisle, PA
Posts: 47
|
Re: What should setting be on DPI charger
See link below. I got this right from DPI's website. Hope this helps.
http://www.dpipower.com/store/index....cal-questions/ Last edited by jeremy98; 12-05-2018 at 10:53 AM.. Reason: bad pic |
12-05-2018, 11:29 AM | #3 |
Gone Wild
Join Date: Jun 2018
Location: Independence, LA
Posts: 216
|
Re: What should setting be on DPI charger
I would think mode 5 due to the AH rating but according to this thread DPI recommends mode 6 and that mode 12 is for AGM batteries not flooded. Some say 4 is a good mode for them too, which is what it comes in from the factory.
http://www.buggiesgonewild.com/elect...ight=t875+mode |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
What setting for DPI charger? | Electric Club Car | |||
DPI charger mode setting | Electric EZGO | |||
What setting on a car charger | Electric Club Car |