|
07-18-2021, 09:50 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2019
Posts: 15
|
Tortoise/Rabbit switch
I have a 2008 48 volt P4 ParCar. The dash has a place that is marked for the Tortoise/Rabbit switch, but a switch is not installed. Is this something I can add? If so, will it slow me down, or speed me up?
Thanks, Larry  Sent from my iPad using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-13-2021, 02:54 PM
|
#2 |
|
Not Yet Wild
Join Date: Apr 2020
Location: 19342
Posts: 63
|
Re: Tortoise/Rabbit switch
I have a Suv-l. I have installed a switch but did not get any difference. I have come to learn that if it works will work depending on if the controller was programmed to react to that signal
|
|
|
|
|
09-13-2021, 03:50 PM
|
#3 |
|
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,383
|
Re: Tortoise/Rabbit switch
right now adding a switch won't make a difference without reprogramming as the controller is set for hi and low to be the same speed.
A non-lsv top speed is set for 19mph, lsv is 25. only difference is the switch and the programming. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ezgo L6 elite turtle rabbit switch | Electric EZGO | |||
| Rabbit/Turtle Switch for 2009 RXV Curtis Upgrade | Electric EZGO | |||
| Into the rabbit hole I go. | Body and Paint | |||
| Down another rabbit hole...And I blame you guys | On Road Golf Carts! | |||
Linear Mode
