|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-03-2010, 07:06 AM | #31 |
Not Yet Wild
Join Date: Sep 2010
Posts: 29
|
Re: Modifying Governor on G16 & G22
Thanks Gutterboy,
where do you put the spring exactly? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2010, 08:07 PM | #32 |
Not Yet Wild
Join Date: Aug 2009
Location: New Brunswick,Canada
Posts: 54
|
Re: Modifying Governor on G16 & G22
should be a hole in the throttle Cam i think, and hook the other end in the Throttle cable Bracket kinda like so.
|
09-05-2010, 08:37 AM | #33 |
Not Yet Wild
Join Date: Sep 2010
Posts: 29
|
Re: Modifying Governor on G16 & G22
Thanks again gutterboy,
cart seems to be running good now. |
09-12-2010, 09:30 PM | #34 |
Not Yet Wild
Join Date: Aug 2010
Location: New York
Posts: 26
|
Re: Modifying Governor on G16 & G22
thank you for your posts they helped me out.
|
10-25-2010, 07:39 AM | #35 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: Modifying Governor on G16 & G22
|
|
|
02-23-2011, 07:08 AM | #36 |
Not Yet Wild
Join Date: Dec 2008
Posts: 22
|
Re: Modifying Governor on G16 & G22
I have a G16 model and the governor has broken off in the trainy and become jammed inside the trainy. Anyone have any ideas?
If I do get it out, is there a replacement or is the trainy shot? Should I pull off the side trainy cover? Any ideas? Thanks, |
02-23-2011, 11:23 AM | #37 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: Modifying Governor on G16 & G22
I would pull the whole trans and split the case, check everything out. Parts loose in a gearbox are very bad things, everything must be perfect in there. Its a pain but not that hard to take them out. Otherwise have it done it will trash it more if you use it. Unless you are saying it is not affecting anything and in that trans it will not, I had a G1 it broke but it stayed in the shaft hole and never bothered anything.
|
03-02-2011, 07:06 AM | #38 |
Not Yet Wild
Join Date: Dec 2008
Posts: 22
|
Re: Modifying Governor on G16 & G22
Thanks... Got the trainy out and found the problem.... Bent governor
|
04-01-2011, 03:23 PM | #39 |
Not Yet Wild
Join Date: Apr 2011
Location: Knoxville TN
Posts: 4
|
Re: Modifying Governor on G16 & G22
Wow..First of all I jest purchased my first cart yesterday.(Total stock '04 G22) and of course the first thing I wanted to do was make it faster. Found this forum and today did the modification....What a difference and very simple Thanks for the great info!!!!
Now on to more mods, as the piggy bank will allow.... |
04-02-2011, 05:34 PM | #40 |
Not Yet Wild
Join Date: Apr 2011
Location: Knoxville TN
Posts: 4
|
Re: Modifying Governor on G16 & G22
Ok so after riding the cart some I have noticed your ether wide open or no throttle at all.. No just cursing around mid throttle. If I try mid throttle it gets real jerky. Any ideas??
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Governor question | Gas Yamaha | |||
88 ez go governor | Gas EZGO | |||
governor | Gas Club Car |