Need more RPMs ?

1989Marathon · 01-02-2014, 10:00 PM

You will have to wait until you install the carb to figure out the jetting. The exhaust is fine how it is.

Morgan44 · 01-02-2014, 10:32 PM

Well I guess what I'm asking is, what jets should I order? I don't want to get the carb, install and then have to wait for another order to get her dialed in. I don't mind spending a little extra money to make life easier. Also I don't mind spending the extra money to get the legit mikuni if it's a better product. Or am I missing something?

1989Marathon · 01-03-2014, 06:52 AM

If it was me, I would buy a used Mikuni from an old 2 stroke motor. If you get one from a 125–250cc motor, the jets will be close. There is really no way to tell exactly what jets you will need until you run it. I may have a carb if interested.

Morgan44 · 01-03-2014, 08:37 AM

I'm interested. Would advice be included?

1989Marathon · 01-03-2014, 08:42 AM

Sure. Let me see what I have.

1989Marathon · 01-03-2014, 01:40 PM

I have a Mikuni VM30 carb that came off of a Polaris Fuji 244cc motor. That's the same displacement as the motor you currently have. Your motor is also made by Fuji. I also have 2 different adapter plates to mate it to the EZGO motor.
If interested, send me a PM and I can get you some pics.

01-02-2014, 10:00 PM	#11
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: Need more RPMs ? You will have to wait until you install the carb to figure out the jetting. The exhaust is fine how it is.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

01-02-2014, 10:32 PM	#12
Morgan44 Gone Wild Join Date: Oct 2013 Posts: 690	Re: Need more RPMs ? Well I guess what I'm asking is, what jets should I order? I don't want to get the carb, install and then have to wait for another order to get her dialed in. I don't mind spending a little extra money to make life easier. Also I don't mind spending the extra money to get the legit mikuni if it's a better product. Or am I missing something?
Morgan44 Gone Wild Join Date: Oct 2013 Posts: 690

01-03-2014, 06:52 AM	#13
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: Need more RPMs ? If it was me, I would buy a used Mikuni from an old 2 stroke motor. If you get one from a 125–250cc motor, the jets will be close. There is really no way to tell exactly what jets you will need until you run it. I may have a carb if interested.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

01-03-2014, 08:37 AM	#14
Morgan44 Gone Wild Join Date: Oct 2013 Posts: 690	Re: Need more RPMs ? I'm interested. Would advice be included?
Morgan44 Gone Wild Join Date: Oct 2013 Posts: 690

01-03-2014, 08:42 AM	#15
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: Need more RPMs ? Sure. Let me see what I have.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

01-03-2014, 01:40 PM	#16
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730	Re: Need more RPMs ? I have a Mikuni VM30 carb that came off of a Polaris Fuji 244cc motor. That's the same displacement as the motor you currently have. Your motor is also made by Fuji. I also have 2 different adapter plates to mate it to the EZGO motor. If interested, send me a PM and I can get you some pics.
1989Marathon Gone Wild Join Date: Oct 2010 Posts: 6,730

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
RPMS for 295 robin	Gas EZGO
G2 RPMS need to ask again	Gas Yamaha
RPMs	Gas EZGO
HP and RPMs	Extreme DC!
low rpms only	Gas EZGO