|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-13-2014, 05:36 PM | #1 |
Not Yet Wild
Join Date: Mar 2014
Location: North Carolina
Posts: 61
|
Installed new cables...new problem
I just installed new 4ga cables and everything is working good except the lights. Any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2014, 05:40 PM | #2 |
Guest
Posts: n/a
|
Re: Installed new cables...new problem
lights need 12v .. make sure lights are wired to batteries that are 12v
it would help if you supplied volts and battery info on your cart |
04-13-2014, 07:04 PM | #3 |
Not Yet Wild
Join Date: Mar 2014
Location: North Carolina
Posts: 61
|
Re: Installed new cables...new problem
Fixed my problem. Looked at the before picture and had the
Lights hooked to the wrong terminal. Thanks for the help crash. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Acceleration Problem 1992 EZGO Marathon D&D Controller installed | Electric EZGO | |||
Got my new stuff installed...still got a problem somwhere. | Electric EZGO | |||
what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO | |||
New installed controller and motor.. stop and go problem | Electric EZGO | |||
lift installed, steering problem | Lifted Golf Carts |