lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-08-2020, 02:50 PM   #1
gable74
Not Yet Wild
Yamaha
 
Join Date: May 2020
Location: MARYLAND
Posts: 57
Default G29 panel and body Rivets/Pins

Does anyone sell a pack of these to replace all the rivets on a G29? If not, does anyone know a quantity and type to do an entire first gen g29 (2010)?

I am planning on removing the body and side panels for paint. I will need to remove the wheel liners and floor mat as well. I would like to replace these areas with new rivets and or Christmas tree pins.

Thanks,
gable74 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-08-2020, 07:20 PM   #2
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,247
Default Re: G29 panel and body Rivets/Pins

Heres a link to help you get the correct stuff (and the diagrams will help you remove the panels more easily). Pay attention to the quantities used, the part number is for 1, not a whole pack...

https://www.shopyamaha.com/parts-catalog/lines/golfcar
cgtech is offline   Reply With Quote
Old 06-08-2020, 08:04 PM   #3
gable74
Not Yet Wild
Yamaha
 
Join Date: May 2020
Location: MARYLAND
Posts: 57
Default Re: G29 panel and body Rivets/Pins

Thanks! I will get the list put together. Wish there was a way to cross reference the Yamaha part numbers with less expensive off the shelf parts.
gable74 is offline   Reply With Quote
Old 06-09-2020, 08:54 AM   #4
gable74
Not Yet Wild
Yamaha
 
Join Date: May 2020
Location: MARYLAND
Posts: 57
Default Re: G29 panel and body Rivets/Pins

For my year G29, and I would assume all years are the same 07 - 16, here is the rivet part numbers and quantities. This covers ALL body panels, front, rear, sides, floor mat, inner fenders, etc. I HAVE NOT included actual metal screws/fasteners as they should all be reusable.

90267-63047-00 qty. 5
90269-07001-00 qty. 5
JW1-K7329-00-00 qty. 5
JW1-K7449-00-00 qty. 6
90269-06804-00 qty. 15
90269-08813-00 qty. 11
90267-60840-00 qty. 3

Cost in cart before shipping is $59 through Partzilla.

Would be nice to get specs on these parts and be able to cross reference with off the shelf stuff and save a lot of money.

Thanks for the link @cgtech
gable74 is offline   Reply With Quote
Old 06-09-2020, 10:28 AM   #5
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,247
Default Re: G29 panel and body Rivets/Pins

Quote:
Originally Posted by gable74 View Post
For my year G29, and I would assume all years are the same 07 - 16, here is the rivet part numbers and quantities. This covers ALL body panels, front, rear, sides, floor mat, inner fenders, etc. I HAVE NOT included actual metal screws/fasteners as they should all be reusable.

90267-63047-00 qty. 5
90269-07001-00 qty. 5
JW1-K7329-00-00 qty. 5
JW1-K7449-00-00 qty. 6
90269-06804-00 qty. 15
90269-08813-00 qty. 11
90267-60840-00 qty. 3

Cost in cart before shipping is $59 through Partzilla.

Would be nice to get specs on these parts and be able to cross reference with off the shelf stuff and save a lot of money.

Thanks for the link @cgtech
You would assume incorrectly... there were some changes over the years..
cgtech is offline   Reply With Quote
Old 06-09-2020, 10:31 AM   #6
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,247
Default Re: G29 panel and body Rivets/Pins

Quote:
Originally Posted by gable74 View Post
Thanks! I will get the list put together. Wish there was a way to cross reference the Yamaha part numbers with less expensive off the shelf parts.
I work at a dealer, and my ocd dislikes incorrect clips & fasteners, so I can't help you find "some other ones that might work".
cgtech is offline   Reply With Quote
Old 06-09-2020, 10:36 AM   #7
gable74
Not Yet Wild
Yamaha
 
Join Date: May 2020
Location: MARYLAND
Posts: 57
Default Re: G29 panel and body Rivets/Pins

Quote:
Originally Posted by cgtech View Post
I work at a dealer, and my ocd dislikes incorrect clips & fasteners, so I can't help you find "some other ones that might work".
Quote:
Originally Posted by cgtech View Post
You would assume incorrectly... there were some changes over the years..
lol.....well then what I have provided is a good jumping off point for anyone needing rivets. Should be 90% of the way there anyway.

Thanks,
gable74 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Push Pins for body Fastener? Gas EZGO
Rocker Panel Rivets Electric EZGO
Body Rivets Electric EZGO
Body Rivets Electric EZGO


All times are GMT -5. The time now is 08:12 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.