Got the 1110 Hauler started! Temp?

BaggageCar · 05-12-2010, 08:55 PM

I got the wire issue fixed and also figured out my ignition switch and solenoid are bad. After rigging up a jumper for the ignition and jumping the solenoid I got it started. Did not sound bad. I got my IR gun out and checked the exhaust manifold. The temp was running at 425 degree after about 4-5 minutes at about 1/3 throttle. Is this normal?

Thanks,
Bryan

chardonite · 05-12-2010, 09:09 PM

I don't think that seems too hot.

05-12-2010, 08:55 PM	#1
BaggageCar Not Yet Wild Join Date: May 2010 Posts: 20	Got the 1110 Hauler started! Temp? I got the wire issue fixed and also figured out my ignition switch and solenoid are bad. After rigging up a jumper for the ignition and jumping the solenoid I got it started. Did not sound bad. I got my IR gun out and checked the exhaust manifold. The temp was running at 425 degree after about 4-5 minutes at about 1/3 throttle. Is this normal? Thanks, Bryan
BaggageCar Not Yet Wild Join Date: May 2010 Posts: 20

05-12-2010, 09:09 PM	#2
chardonite Gone Wild Join Date: Jul 2009 Location: Chardon Ohio Posts: 257	Re: Got the 1110 Hauler started! Temp? I don't think that seems too hot.

Similar Threads
Thread	Forum
1997 jacobson 1110 hauler	Gas EZGO
Wiring Diagram for 1999 EZGO 1110 Hauler Gas 350?	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum