|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
11-25-2011, 10:50 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2011
Posts: 14
|
power from a curtis control box
working on a freedom se pds on dash fnr and reviewing scottyb's schematic showing the power conductors of each curcuit and looking looking at the contrller J1 connector pin 4 ,which is the 36v wire from the reed switch. If that conductor to the controller(curtis 73326 G05) pin is 36v live, wouldn't pins 1 and 9 at least be active (fnr switch and key switch circuit)? Aren't those primary circuits always active to be ready first for use?
|
|
|
| Tags |
| curtis control box issue |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| control Box Fix | Electric EZGO | |||
| 93 txt marathon curtis controller loose terminal causing low power? | Electric EZGO | |||
| Max Power, No control | Electric EZGO | |||
Threaded Mode