lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-30-2013, 06:23 PM   #1
DaveTM
Gone Wild
 
DaveTM's Avatar
 
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,033
Default Herky-Jerky when slow

Ok, so I believe this is that Gizmo know as the ITS (The round part that the tube-like thing goes into) And then there is the tube gizmo....which is called the _________ fill in the blank.

I've upgraded my controller and my microswitch is new, all of my wiring is upgraded and brand new, and I'm getting a little herky-jerky "movement" when I'm going very slow in forward.

Now, I'm guessing there needs to be an adjustment to the tube gizmo?

Any help on what to loosen, do I disconnect power before I wrench anything loose here? And what direction should I move anything? Forward or backward?

Thanks.

I know enough to be dangerous......Dave

DaveTM is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
2006 Precedent super jerky when trying to move slow Electric Club Car
Herky Jerky 2008 Precedent Electric Club Car
94 Marathon jerky at slow speed. Electric EZGO
Cart jerky, wont go slow! Gas Club Car
2004 jerky clutch slip feel at slow accel. now no go. Electric EZGO


All times are GMT -5. The time now is 10:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.