lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-07-2009, 07:24 PM   #1
motormouth27
Gone Wild
E-Z-GO
 
Join Date: Mar 2009
Location: Crofton MD
Posts: 217
Default What gauge wire to use for underglow control box?

I have a 2007 ez go and I was wondering where is a good spot to mount the control box and what type of automative wire should I use 14 or 16?? Please help
motormouth27 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-07-2009, 09:16 PM   #2
Cindylynn
Getting Wild
 
Join Date: Apr 2009
Posts: 102
Default Re: What gauge wire to use for underglow control box?

Truthfully, what gauge of wire matters (when it's between 14 and 16 gaude) very little. I would go for the 16 gauge wireing myself. This heavy wire will be sure to carry a lot of power and have no issues. You could use ether one and it would be fine.

I do not have an underglow panel and I am not interested in one, but the lights that I do have installed on my cart, I put the panel on the dash next to the steering wheel. My headlights and tail lights must be reliable. I chose 16 gauge marine (maine/boat "things" (seats, etc) are always good for carts) wire for my cart's power system.
Cindylynn is offline   Reply With Quote
Old 05-07-2009, 10:01 PM   #3
crash12888
Gone Crazy
 
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
Default Re: What gauge wire to use for underglow control box?

14ga is heavier than the 16ga but both will carry the minimal amps you are talking about.
The directions don't mention what ga. to use? Do they mention an inline fuse?
crash12888 is offline   Reply With Quote
Old 05-11-2009, 05:38 PM   #4
bustin-bs
Getting Wild
 
bustin-bs's Avatar
E-Z-GO
 
Join Date: Aug 2008
Location: California
Posts: 109
Default Re: What gauge wire to use for underglow control box?

I see allot of under glows on carts how much power do these carts put out? Must be enough to run the lights and a stereo, i would assume.
Under glow i have to agree i would run 16g...
bustin-bs is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
2 or 4 gauge wire Lifted Golf Carts
Melex model 112 control wire diagram Melex
What gauge wire ? Electric Club Car
does any one know what gauge wire.... Electric EZGO
what is the diameter of 2 gauge and 4 gauge battery wire? Electric EZGO


All times are GMT -5. The time now is 10:02 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.