|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-31-2023, 12:19 PM | #1 |
Not Yet Wild
Join Date: Sep 2017
Posts: 11
|
HELP Transaxle Bushing 94 Carryall REPLACEMENTS TOO SMALL what to do?? PICS Inside
The 1994 carryall FE290 I am working out needed new outer axle bearings. I was unable to press the original bushings off so I cut them off. This was before realizing that nobody out there sells the same size bushing.
I believe I need club car part #1014207 All of the amazon replacements and even Nivel 4836 are smaller than the bushing removed. If using the smaller bushing, there will be a gap between the bushing and the retaining ring. The techs at buggies unlimited told me to go ahead and install it this way. I am no engineer, so I am not sure if this will be acceptable or not. Surely I cant be the only person who ran into this problem. The first picture below shows the new bushing and the second picture shows the old bushing. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-31-2023, 06:12 PM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,666
|
Re: HELP Transaxle Bushing 94 Carryall REPLACEMENTS TOO SMALL what to do?? PICS Insid
Call David hicks www.revolutiongolfcars.com if he can’t get you what you need nobody can
|
06-01-2023, 09:44 PM | #3 |
Gone Wild
Join Date: Sep 2022
Posts: 206
|
Re: HELP Transaxle Bushing 94 Carryall REPLACEMENTS TOO SMALL what to do?? PICS Insid
Or go to your local hardware store and pick up soom machine washers to add on spacing.
|
06-06-2023, 03:39 PM | #4 | ||
Not Yet Wild
Join Date: Sep 2017
Posts: 11
|
Re: HELP Transaxle Bushing 94 Carryall REPLACEMENTS TOO SMALL what to do?? PICS Insid
Quote:
Quote:
Would you put the washers against the bearing and bushing or on the other side against the bushing and the clip ring? |
||
06-07-2023, 01:27 PM | #5 |
Gone Wild
Join Date: Sep 2022
Posts: 206
|
Re: HELP Transaxle Bushing 94 Carryall REPLACEMENTS TOO SMALL what to do?? PICS Insid
If there is no obstruction to putting the washer against the bearing, that would be preferred. Get the washer that fits close on the shaft, if the OD is too large, grid it down.
Richard |
07-03-2023, 10:50 AM | #6 |
Gone Wild
Join Date: Sep 2022
Posts: 206
|
Re: HELP Transaxle Bushing 94 Carryall REPLACEMENTS TOO SMALL what to do?? PICS Insid
brenth560
Can you give us an update on your repair ? Richard |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
series or sepex motor pics inside. | Electric EZGO | |||
Help Me ID This Motor So I Can Get Parts (Pics Inside) | Big Block Talk! | |||
Hello, new G9 owner, need help...pics inside! | Gas Yamaha | |||
Concerns I have With My EZGO TXT Pics Inside | Electric EZGO | |||
Usps Came Today! pics inside | Lifted Golf Carts |