|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-01-2023, 05:14 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Location: OH
Posts: 9
|
Yamaha Alltrax XCT48300
I have a Yamaha G19 with alltrax xct48300 controller and a BMS48 with LiPo batteries. The cart stopped working. I have 52 volts across the selenoid and 25-26 from each battery pack. The cart does not respond. I have plugged in the laptop and no errors show. My charger may have shorted. Could that have messed up the BMS? Is there a way to do a hard reset on either the controller or BMS or both?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-01-2023, 05:35 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,193
|
Re: Yamaha Alltrax XCT48300
If you have volts out of the Lipo battery pack, the BMS isn't causing it not to run. The laptop should show every input to determine why it won't run. Look at each input logic signal there. By the way, you did not post in the Yamaha section. :-)
|
Tags |
alltrax, xct48300 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Curtis 1510 to Alltrax XCT48300 wiring question | Electric Club Car | |||
Yamaha G16 with Alltrax 300 Help | Electric Yamaha | |||
Impact of Alltrax XCT48300? | Electric Club Car | |||
Alltrax XCT48300 For Sale (YDRE) | Golf Carts and Parts | |||
yamaha g8 alltrax 4844 | Electric Yamaha |