03-08-2015, 11:00 PM | #1 |
Not Yet Wild
Join Date: Mar 2015
Posts: 4
|
No reverse
Hello guys, I'm new here and hoping I'm in the correct place. My question is. I have a Jacobsen 1110 Hauler with a ME29 rear diff which will not go into reverse. When I search this thing it always comes up EZGO me29 diff. Can anyone help me out or point me to the correct forum??? Thanks so much, I'm at my witts end with this. Cables are all working, it goes forward great. Thanks again
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-08-2015, 11:53 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: No reverse
Welcome to BGW
Remove to cables from the rear end and shift it in to forward and reverse by hand and see if that works. Then you will know if it is the rear end or the cables. I would say it's a bad cable, or it's out of adjustment |
03-09-2015, 06:35 PM | #3 |
Not Yet Wild
Join Date: Mar 2015
Posts: 4
|
Re: No reverse
Thank you for your reply! I have actually loosened the cables right up to where they were flopping, still no go in the reverse side. Do you think it is internal? Can I even buy parts for it if it is inside?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
No reverse. HD forward reverse switch needed? | Electric Club Car | |||
Goes in reverse when switch is in forward. does nothing with swicth in reverse | Electric EZGO | |||
Foward in reverse and reverse in forward | Electric Club Car | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO |