|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-13-2009, 10:07 PM | #1 |
Not Yet Wild
Join Date: Apr 2009
Location: Ft Worth Texas
Posts: 11
|
Wiring the coil on a new 350
I just bought a new Robin for a 2001 Workhorse and the coil setup is much different, the new set up has coil and an ignitor and I'm not sure how to wire it up. The old engine has a standard style coil with 2 wires with spade connectors, the new one has 2 small pins on the coil and appears to need a lock style connector. Any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2009, 10:17 PM | #2 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Wiring the coil on a new 350
sounds like the new 350 is a MCI engine? is the ex manifold part of the head, pictures??
|
04-14-2009, 06:19 AM | #3 |
Not Yet Wild
Join Date: Apr 2009
Location: Ft Worth Texas
Posts: 11
|
Re: Wiring the coil on a new 350
If you are you talking about the exhaust manild, then yes it is.
|
04-14-2009, 03:52 PM | #4 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Wiring the coil on a new 350
I've got the same motor and put it in my '99 wokhorse. Did you Buy the MCI retro kit with it? It has the new muffler and ignitor and adapter wires to change. A different coil comes w/ the MCI motor.
|
04-14-2009, 04:09 PM | #5 |
Not Yet Wild
Join Date: Apr 2009
Location: Ft Worth Texas
Posts: 11
|
Re: Wiring the coil on a new 350
I did not, where can I get the kit. I got this motor new in the box for $700.00 and I hope its not going to cost me in the end :(
|
04-14-2009, 04:18 PM | #6 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Wiring the coil on a new 350
you can buy the kit from ez go it's around 200 bucks
|
04-14-2009, 04:31 PM | #7 |
Not Yet Wild
Join Date: Apr 2009
Location: Ft Worth Texas
Posts: 11
|
Re: Wiring the coil on a new 350
If I have all the parts, can I wire it up myself? It looks pretty straight forward, also, is the muffler completely different?
|
04-14-2009, 04:37 PM | #8 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Wiring the coil on a new 350
yea, you really need that, the MCI motors starts better than the older motors, and those parts are probably why. EZGO was closing out their stock and the kit was under 100. then. You'll need to contact our sponsors or local EZGO dealer. Your old muffler will not bolt op to the new head without moving one of the mounts!
Sorry for the bad news. |
04-14-2009, 04:39 PM | #9 |
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Wiring the coil on a new 350
if it's pretty straight forward when why are you asking how to wire it? and you have your old engine and muffler you should be able to tell what's different??
|
04-14-2009, 04:40 PM | #10 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: Wiring the coil on a new 350
I think I saved the instructions. I'll check tomorrow @ the shop and let you know. If I have them I'll mail you a copy. Theres not a lot of difference in wiring.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
ez-go coil | Golf Carts and Parts | |||
clubcar coil | Test Post | |||
need a coil for a 81 G-1 | Golf Carts and Parts | |||
Help with Coil Overs | Design Center | |||
Red Hot Resistor Coil | Electric EZGO |