|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-25-2019, 07:26 PM
|
#21 |
|
Gone Wild
Join Date: Apr 2019
Posts: 198
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
Throttle range error is red immediately then turns blue. Same with shutdown.
I wired my reversing contactor EXACTLY the way Scotty’s instructions are given, which is different from the Alltrax wiring instructions for the SW202. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-25-2019, 07:28 PM
|
#22 |
|
Gone Wild
Join Date: Apr 2019
Posts: 198
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
My speed curve is-
Left Column: 0, 1, 99, 100 Right Column: 0, 0, 100, 100 Torque curve is much more gradual with 9 rows instead of only four. |
|
|
|
|
06-25-2019, 07:42 PM
|
#23 |
|
Gone Wild
Join Date: Apr 2019
Posts: 198
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
The throttle percentage goes from 0-100 as you release the pedal, nothing while pressing it down.
|
|
|
|
|
06-25-2019, 07:52 PM
|
#24 |
|
Just Gone
 Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
What kind of throttle are you using? Stock Yamaha?
|
|
|
|
|
06-25-2019, 07:53 PM
|
#25 |
|
Gone Wild
Join Date: Apr 2019
Posts: 198
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
Yes, 0-1k as measured today.
|
|
|
|
|
06-25-2019, 07:57 PM
|
#26 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
Change the throttle type to something else and save it, then change it back to the Yamaha throttle and save it again.
Some of the Altrax troubleshooting info suggests that procedure for the uncalibraded throttle error. |
|
|
|
|
06-25-2019, 08:03 PM
|
#27 |
|
Gone Wild
Join Date: Apr 2019
Posts: 198
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
No luck. Same problem.
|
|
|
|
|
06-25-2019, 08:11 PM
|
#28 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
I am not familiar with Yamaha so I looked for the wiring diagram.
That is a 3-wire throttle, not a 0-1k rheostat. There is a note in their diagram to swap the throttle Blue wire (currently on B-) with the Green wire if the throttle response is backwards. |
|
|
|
|
06-25-2019, 08:12 PM
|
#29 |
|
Gone Wild
Join Date: Apr 2019
Posts: 198
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
Would wiring the reversing contactor really have any impact on the throttle? It goes forward and reverse according to the rocker switch, just weird throttle with the new controller.
|
|
|
|
|
06-25-2019, 08:13 PM
|
#30 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax/SW202/HD Solenoid: clicking no movement
You did not replace the Controller?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| SW202 reversing contactor and Alltrax AXE controller | Electric EZGO | |||
| 36v TXT Solenoid clicking but no movement | Electric EZGO | |||
| 84 DS Resistor Cart no clicking and no movement | Electric Club Car | |||
| Reversing Contactor SW202 click, no movement | Electric EZGO | |||
| Clicking noise.....No movement | Electric EZGO | |||
Linear Mode
