|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-07-2019, 04:49 PM | #1 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
2008 Yamaha G29 no go
Cart was running but now nothing l
No solenoid click no reverse buzzard 50 volts at key switch both side (key switch good) Is there a way to bypass solenoid on these carts |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-07-2019, 09:48 PM | #2 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
2008 Yamaha G29 no go
You don’t want to do that. Check the solenoid with a multimeter first. If it is not clicking it could be a number of things though.
Is there voltage at the small terminals of the solenoid when the pedal is pressed? |
08-08-2019, 04:13 PM | #3 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: 2008 Yamaha G29 no go
I have right at full battery pack at both small terminals. 50.2 volts. This is with pedal press or not pressed. Doesn’t make a difference
|
08-08-2019, 04:51 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2008 Yamaha G29 no go
Tow/run switch in Run, push the cart. We are expecting it to beep at you & try to stop the cart from rolling away.
|
08-08-2019, 05:21 PM | #5 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: 2008 Yamaha G29 no go
Rolls freely and no beep
|
08-08-2019, 08:21 PM | #6 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: 2008 Yamaha G29 no go
Any advice?
|
08-09-2019, 05:39 AM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2008 Yamaha G29 no go
Since you have steady voltage at solenoid small terminals at all times, right? (All times)... Might be controller. Might be.. no solenoid click ever, no reverse buzzer, no resistance to pushing....
|
08-09-2019, 06:02 AM | #8 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: 2008 Yamaha G29 no go
Yes that is correct. Voltage all
The time on small terminals |
08-09-2019, 10:15 AM | #9 |
Gone Wild
Join Date: Apr 2015
Posts: 461
|
Re: 2008 Yamaha G29 no go
Rechecking everything. I have full Battery negative on the key switch. How would this occur? I check pin 8 on 26 pin and it’s negative there which I new it has to be but just wanted to make sure.
Does this mean controller and is this common or something wired wrong |
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 Yamaha ? | Gas Yamaha | |||
2008 yamaha | Electric Yamaha | |||
2008 Yamaha | Gas Yamaha | |||
2008 Yamaha Drive | Electric Yamaha | |||
2008 Yamaha PDS questions | Electric Yamaha |