|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-12-2009, 11:18 AM | #1 |
Not Yet Wild
Join Date: May 2009
Location: Philadelphia, PA
Posts: 33
|
Yamaha Governor bypass Instructions for 1999 G-16
Hello,
I have read and re-read the forum on the bypass instructions but I noticed the forum started for the G9 then moved onto the G-16 or tighening the 10mm nut (If able to do on this cart) All I want is a little more speed or power that is it 1999 G-16 model Can someone be specific in a simple manner, reading the forum that runs on gets a little confusing |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-12-2009, 11:26 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
Welcome!!
Yep, tightening the 10mm nut. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
05-12-2009, 11:31 AM | #3 |
Not Yet Wild
Join Date: May 2009
Location: Philadelphia, PA
Posts: 33
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
Ok Thanks
But where is it, how much more should I tighten it then it already is How many turns ??? Will it smoke ?? Is that all that has to be done ?? What does tightn it do, no more stress on engine ? Thanks I know I am a newbie so dont get frust. by stupid question |
05-12-2009, 11:58 AM | #4 |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
Take the black access cover off behind the seats. It looks like this. The nut is circled.
If it smokes, you have a different problem. I ran mine turned all the way in for 4 years with no issues. |
05-12-2009, 12:00 PM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
Thanks Scot!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
05-12-2009, 12:03 PM | #6 |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
|
05-12-2009, 12:09 PM | #7 |
Not Yet Wild
Join Date: May 2009
Location: Philadelphia, PA
Posts: 33
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
I am going to try it Thursday 4 sure
1 more question, only cause I noticed that my back is secured with rivit bolts is there another way to access that w/out removing back cover Just want to do this with as little headach as possible And thank You again (both you guys) |
05-12-2009, 12:24 PM | #8 | |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
Quote:
|
|
05-12-2009, 03:25 PM | #9 |
Gone Wild
Join Date: Apr 2009
Location: peotone IL
Posts: 320
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
I just did mine today and was able to reach it by just taking the seat off but it was very uncomfortable on my arms.
|
05-13-2009, 10:15 AM | #10 |
Not Yet Wild
Join Date: May 2009
Location: Philadelphia, PA
Posts: 33
|
Re: Yamaha Governor bypass Instructions for 1999 G-16
How much of a difference did it make, how far did you turn the nut
|
|
|
Similar Threads | ||||
Thread | Forum | |||
g1 governor bypass top speed | Gas Yamaha | |||
Yamaha governor bypass | Gas Yamaha | |||
ez-go governor bypass? | Gas EZGO | |||
Yamaha Torque Kit Instructions | Gas Yamaha | |||
82 G2 Governor Bypass | Gas Yamaha |