|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-04-2009, 08:11 AM
|
#1 |
|
Gone Wild
Join Date: May 2009
Location: Dallas
Posts: 208
|
Help with dash on G9
I have a carbon fiber dash face going on my G9, but I am having trouble wrapping my mind around how it is suppose to mount. Does it go over the rubber on the top of the front cowl or under it. If under, does it go just under the rubber or metal aswell? Can anyone shed light on this for me?
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-04-2009, 09:43 AM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Help with dash on G9
It goes over the rubber trim.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
06-04-2009, 10:19 AM
|
#3 |
|
Gone Wild
Join Date: May 2009
Location: Dallas
Posts: 208
|
Re: Help with dash on G9
So it screws in the rubber itself?? I set it up their last night and it didnt seem to fit on the sides near the bottom very well. I will give it another look see tonight.
|
|
|
|
|
06-04-2009, 10:58 AM
|
#4 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Help with dash on G9
Yep, into the rubber.
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
06-05-2009, 08:18 AM
|
#5 |
|
Gone Wild
Join Date: May 2009
Location: Dallas
Posts: 208
|
Re: Help with dash on G9
I got it mounted lastnight. Not a huge fan of the way it mounts, I may try to cut the flange off and mount it from the backside. Thanks for the help.
|
|
|
|
|
06-05-2009, 08:35 AM
|
#6 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,873
|
Re: Help with dash on G9
Pic's
 |
|
|
|
|
|
|
|
06-05-2009, 08:43 AM
|
#7 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Help with dash on G9
I don't like the way it mounts either but mine has been on over 3 years with no problems.
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
09-08-2010, 09:01 PM
|
#8 |
|
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
Re: Help with dash on G9
Installed mine and cut the bottom stock plastic clips to fit against dash and not go under. it seems to fit well now but the problem I had was screwing it in. There must be a metal reatiner that holds the molding all along the top and i'm not able to screw through it. Havent tried to drill thorugh it yet. How did you guys mount the dash?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| will a g-2/g-9 dash fit a G8 | Electric Yamaha | |||
| Dash | Electric EZGO | |||
| G-16 dash | Golf Carts and Parts | |||
| Best way to cut dash? | Electric EZGO | |||
| will g2/g9 dash fit a g8? | Gas Yamaha | |||
Linear Mode
