Programming All Trax controller

szc168 · 12-28-2009, 02:18 PM

I've been trying to call All Trax but no one will answer today. I'm trying to program a DCX 400 AMP controller in a 2003 EZGO with 20" tires, lifted, back seat and new D&D motor 502.1, 36V system, hilly terrain. The controller currently is programmed for "stock motor" only according to the stickers on the controller box. I have the software and cable for changing the parameters but does anyone know what each setting should be set to? Help is appreciated!

pggroves · 12-29-2009, 12:05 AM

What does D&D say?

jauguston · 12-29-2009, 10:21 AM

If you are looking for more power through programming changes forget it. The Alltrax factory ships all their controllers set at 100% power.

Jim

szc168 · 12-29-2009, 03:26 PM

Not looking for more power just the right settings for long life.
Currently - Field Map #4, Max output 100%, Under voltage 16, Over voltage 55, Throttle up 5, Throttle down 5, Brake Current 65%, Top Speed 100%. Turbo and 1/2 speed reverse selected.

mikesmotortoys · 12-29-2009, 03:38 PM

Don't take this the wrong way, but can't the people that sold you the controller and motor help you?

LostHusker · 12-29-2009, 05:02 PM

Hmmmm?

szc168 · 12-29-2009, 06:27 PM

None taken. Story is - cart purchased 2+yrs ago with controller and stock motor with lift kit, tires and back seat. Since then cart started melting battery cables and posts. Found the motor to be burnt internally. Chose to upgrade to D&D motor and 4ga cables.
Now with the controller having two stickers stating "stock motor only" I want to know what the RIGHT settings are with the new motor. Just figured someone might know.

mikesmotortoys · 12-29-2009, 06:30 PM

Quote:

Originally Posted by szc168

None taken. Story is - cart purchased 2+yrs ago with controller and stock motor with lift kit, tires and back seat. Since then cart started melting battery cables and posts. Found the motor to be burnt internally. Chose to upgrade to D&D motor and 4ga cables.
Now with the controller having two stickers stating "stock motor only" I want to know what the RIGHT settings are with the new motor. Just figured someone might know.

It may be a NON programmable controller...

szc168 · 12-29-2009, 06:44 PM

It's a 400 Amp DCX model and programmable as I have connected to it already but made no changes.

mikesmotortoys · 12-29-2009, 06:57 PM

Quote:

Originally Posted by szc168

It's a 400 Amp DCX model and programmable as I have connected to it already but made no changes.

What were the setting put at? I can't imagine why you can't put everything at 100% and go for it

12-28-2009, 02:18 PM	#1
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13	Programming All Trax controller I've been trying to call All Trax but no one will answer today. I'm trying to program a DCX 400 AMP controller in a 2003 EZGO with 20" tires, lifted, back seat and new D&D motor 502.1, 36V system, hilly terrain. The controller currently is programmed for "stock motor" only according to the stickers on the controller box. I have the software and cable for changing the parameters but does anyone know what each setting should be set to? Help is appreciated!
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13

12-29-2009, 12:05 AM	#2
pggroves steeplejack x Join Date: Jan 2007 Location: Republic of Texas Posts: 3,382	Re: Programming All Trax controller What does D&D say?

12-29-2009, 10:21 AM	#3
jauguston Gone Wild Join Date: Aug 2009 Location: Bellingham,WA Posts: 300	Re: Programming All Trax controller If you are looking for more power through programming changes forget it. The Alltrax factory ships all their controllers set at 100% power. Jim

12-29-2009, 03:26 PM	#4
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13	Re: Programming All Trax controller Not looking for more power just the right settings for long life. Currently - Field Map #4, Max output 100%, Under voltage 16, Over voltage 55, Throttle up 5, Throttle down 5, Brake Current 65%, Top Speed 100%. Turbo and 1/2 speed reverse selected.
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13

12-29-2009, 03:38 PM	#5
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: Programming All Trax controller Don't take this the wrong way, but can't the people that sold you the controller and motor help you?
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-29-2009, 05:02 PM	#6
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Programming All Trax controller Hmmmm?

12-29-2009, 06:27 PM	#7
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13	Re: Programming All Trax controller None taken. Story is - cart purchased 2+yrs ago with controller and stock motor with lift kit, tires and back seat. Since then cart started melting battery cables and posts. Found the motor to be burnt internally. Chose to upgrade to D&D motor and 4ga cables. Now with the controller having two stickers stating "stock motor only" I want to know what the RIGHT settings are with the new motor. Just figured someone might know.
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13

12-29-2009, 06:44 PM	#9
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13	Re: Programming All Trax controller It's a 400 Amp DCX model and programmable as I have connected to it already but made no changes.
szc168 Not Yet Wild Join Date: Dec 2009 Posts: 13

Similar Threads
Thread	Forum
Programming Curtis Controller	Electric golf carts
Precedent Speed code programming??	Electric Club Car
Alltrax axe programming	Electric EZGO
Programming Alltex Controller	Electric Club Car
axe 4844 / initial programming?	Electric EZGO