Voltages at ITS

buddy48 · 03-28-2010, 10:22 AM

I saw a post by roady89 that shows what the voltages should be at the ITS. Right when the solenoid kicks in it should be 1.0 +/- 0.3 volts. Fully depressed it should measure 2.7 +/- 0.5 volts. Are these taken at the black and white connnections with the wire connected, on the terminals of the ITS without the wires connected, or on the wires themselves when they are disconnected from the ITS?

scottyb · 03-28-2010, 10:52 AM

I think it is in the stickies at the top of this section under Ezgo Diagnostics?

buddy48 · 03-28-2010, 11:51 AM

Yeah I saw your sticky. I was hoping for something a little more simple. It doesn't tell me exactly what the voltage should be at the ITS. That is unless I couldn't interpret it. I tell you, all this electircal stuff is not me.

If it is mechanical I can handle it!! I can't see electricity!!

buddy48 · 03-28-2010, 12:09 PM

Is the ITS a go no go kind of item? Either it works or it doesn't?

03-28-2010, 10:22 AM	#1
buddy48 Gone Wild Join Date: Feb 2010 Location: GA Posts: 180	Voltages at ITS I saw a post by roady89 that shows what the voltages should be at the ITS. Right when the solenoid kicks in it should be 1.0 +/- 0.3 volts. Fully depressed it should measure 2.7 +/- 0.5 volts. Are these taken at the black and white connnections with the wire connected, on the terminals of the ITS without the wires connected, or on the wires themselves when they are disconnected from the ITS?

03-28-2010, 10:52 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Voltages at ITS I think it is in the stickies at the top of this section under Ezgo Diagnostics?

03-28-2010, 11:51 AM	#3
buddy48 Gone Wild Join Date: Feb 2010 Location: GA Posts: 180	Re: Voltages at ITS Yeah I saw your sticky. I was hoping for something a little more simple. It doesn't tell me exactly what the voltage should be at the ITS. That is unless I couldn't interpret it. I tell you, all this electircal stuff is not me. If it is mechanical I can handle it!! I can't see electricity!!

03-28-2010, 12:09 PM	#4
buddy48 Gone Wild Join Date: Feb 2010 Location: GA Posts: 180	Re: Voltages at ITS Is the ITS a go no go kind of item? Either it works or it doesn't?

Similar Threads
Thread	Forum
battery voltages	Test Post
what should voltages be on 36v EZGO	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum