|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-13-2011, 12:22 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
G14 governor shaft leaking.
I am in the process of finally installing the clone motor and encountered a problem. I took the accelerator cable off the governor located on the rear differential to connect it directly to the clone motor. When I took it on a little joy ride to test everything out, it seems that I was losing fluid out of the governor shaft. Any ideas on the best way to correct this? Any help would be much appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-13-2011, 01:22 PM
|
#2 |
|
Admin
 Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: G14 governor shaft leaking.
|
|
|
|
|
|
|
|
06-13-2011, 03:51 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
Re: G14 governor shaft leaking.
The shaft actually moves up and down, about 1/2 inch. It never leaked before so I was thinking that when the cables were removed, there isnt pressure there to hold it down any more to keep it sealed.
|
|
|
|
|
06-13-2011, 04:19 PM
|
#4 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: G14 governor shaft leaking.
Could be. I always remove my cables/governor, etc... on all mine. Never had a problem. Might want to make sure its not overfilled. Of course if this was the situation, it would more than likely leak out the overflow/vent hose.
|
|
|
|
|
|
|
|
06-13-2011, 05:38 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2009
Location: Cedar Hill, Missouri
Posts: 290
|
Re: G14 governor shaft leaking.
Spudd how do you like the clone. I like mine alot. I have not gotten pics yet just to dang busy.
|
|
|
|
|
| Tags |
| g14, governor, leak, rear diff |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G16 Governor Shaft? | Gas Yamaha | |||
| Removing Governor Shaft assembly? | Lifted Golf Carts | |||
| 1" shaft to 1 1/8 shaft spacer | Big Block Talk! | |||
| Leaking shocks | Electric Club Car | |||
| Leaking throttle shaft on a 1982 EZGO 2 stroke, is there a fix? | Gas EZGO | |||
Linear Mode
