|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-13-2012, 11:02 AM | #1 |
Gone Wild
Join Date: Nov 2008
Location: Webster Groves, MO
Posts: 520
|
Trying to remove Old solenoid
I am getting a new solenoid after this next Paycheck- hopefully
I have a 48 volt badboy/ezgo cart 2005. I went to Try to remove the old Solenoid on Sunday. First I used a standard 3/8 rachet. then the 1/2 inch rachet, then the 1/2 breaker bar- then the breaker bar with the 3 foot extender and then an electric impact wrench- My neighbor came over and was wondering what the heck I was doing that took that much effort- He asked if the connectors could be welded together? I have SOAKED the connections with KROIL and still no movement- Is it time to just cut them Off? or is there a secret to doing this? thanks for the help- Riding a forrest gump snapper mower around down in the country just aint as much fun as the 4 wheel drive 48volt cart!!! And one the One neighbor drives by, he always yells, run Forrest Run thanks Guys |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How do I remove the crank on a G14 | Gas Yamaha | |||
How do I remove these? | Gas EZGO | |||
How to remove this? | Gas Yamaha | |||
How to remove the | Electric EZGO | |||
How to remove body from G9 | Gas Yamaha |