10-13-2013, 02:19 PM | #11 |
Not Yet Wild
Join Date: Jul 2011
Location: Chicago,Illinois
Posts: 71
|
Re: Jakes lift install ????
Well with a lil force I managed to get em out .The front were the worst no room to swing unless you pull of the rear body.Had to cut the fronts off with a cutting wheel.After getting leafs down had to mess with getting both sides of the bolts out on both sides . Thanks for all the help and input.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-13-2013, 04:51 PM | #12 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: Jakes lift install ????
Mine were horrible to do on my '87, the bolts were partially sheared on the unthreaded part of the shank over the years, which caused them to get stuck in the leaf eyelets. Lots of hammer pounding and they finally came out.
|
10-13-2013, 06:25 PM | #13 |
Gone Wild
Join Date: Jun 2009
Location: Binghamton, NY
Posts: 384
|
Re: Jakes lift install ????
+1 on all of the PB blaster, hammering, cussing, etc.
When you put in your new sleeves, put a little anti-seize compound on the hardware. You may thank yourself down the road. |
10-13-2013, 06:32 PM | #14 |
Not Yet Wild
Join Date: Jul 2011
Location: Chicago,Illinois
Posts: 71
|
Re: Jakes lift install ????
I did do this on some of the front end bolts .My neighbor was asking why I was doing this and I said u see the rearend don't ya .Me and him started laughing.All I got to say was it a B****.
|
10-13-2013, 06:33 PM | #15 |
Not Yet Wild
Join Date: Jul 2011
Location: Chicago,Illinois
Posts: 71
|
Re: Jakes lift install ????
I had to order new hardware of course.
|
10-13-2013, 06:41 PM | #16 |
Gone Wild
Join Date: Jun 2009
Location: Binghamton, NY
Posts: 384
|
Re: Jakes lift install ????
My hardware looked like someone threw it in a grinder once I got it out.....
I just removed and replaced the rear shocks from my recently purchased 1999Gas Club Car. I had to grind a flat spot on the shocks so that I could put Vise Locking Pliers on the area and then turn the bolts off (this was after soaking everything with PB blaster for 1 day). |
|
|
Similar Threads | ||||
Thread | Forum | |||
Jakes lift and tire/wheel install - how long? | Electric Club Car | |||
Tire Rub After Jakes 6 inch Lift Kit Install? | Gas Yamaha | |||
1981 G1 Jakes KIt Install | Gas Yamaha | |||
Install question on Jakes Lift for G22 | Gas Yamaha |